INFORMATION
Fiber optic mechanical splice is to hold two optical fibers together precisely so that light can pass through the fiber. The fiber is aligned and held in place by a self contained assembly. The installation of the fiber mechnical splice is simple, need not expensive equipment. All what needed are a stripper, a cleaver and isopropyl alcohol.
Be applied to connect φ0.25--φ0.9 fiber/cable; take advantage of mature V-groove technologies, suitable for single mode and multimode; No fixture, operation time less than 1 minute; better performance.
Technical specification
Applicable for
|
φ0.25 mm &φ0.90 mm fiber
|
Size
|
45*4.2*4.7mm
|
Optical fiber diameter
|
125μm ( 652 & 657 )
|
Tight buffer diameter
|
250μm & 900μm
|
Applicable mode
|
single & multimode
|
Operation time
|
about 10s (without fiber cut)
|
Insert loss
|
≤ 0. 25 dB（1310nm & 1550nm）
|
Return loss
|
≤ -45dB
|
Fastening strength of naked fiber
|
>5 N
|
Clamping force of fiber with tight buffer
|
>8 N
|
Using temperature
|
-40～+75℃
|
Pigtail to on-site fiber, cable to cable, used in optical cross connection cabinet, ODF, cable splice closure, optical fiber splitting cabinet, 86 type outlet.
Fiber Optic Mechanical Splice Relevant solutions
Application FTTx，CO network restruction
Patent number 2009 1 0032845.8 BD-LJ9B Fiber Optic Mechanical Splic
Ordering information
Related Products
