BD-ONU-111W series is BAUDCOM’s for broadband access market based on the introduction of EPON technology passive optical network terminal products. It’s
with EPON OLT are used together to provide a complete broadband access solution.
EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.
BD-ONU-111W series fully meet IEE802.3ah and CTC3.0 standard protocol. It has good third-party compatibility to work with the third party OLT, It supports 1Gbps transmission rate up and down and provides users with good QOS, flexible bandwidth allocation of Ethernet services and IP integrated service.
BD-ONU-111W series can integration wireless function with meet 802.11 n/b/g technical standards, It has two external antenna, the wireless transmission rate up to 300Mbps. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.
The device shell adopts personalized ventilation design, simple, fashion, steady. High quality environmental protection material is impact resistant, high temperature resistant and good heat dissipation effect to providing users with a more secure Internet environment.
Functional Feature
n Support port-based rate limitation and bandwidth control;
n In compliant with IEEE802.3ah Standard
n Wi-Fi series meet 802.11 n/b/g technical standards
n Up to 20KM transmission Distance
n Support data encryption, group broadcasting, port Vlan separation ,etc.
n Support Dynamic Bandwidth Allocation (DBA)
n Support ONU auto-discovery/Link detection/remote upgrade of software;
n Support port mode of VLAN configuration
n Support power-off alarm function ,easy for link problem detection
n Support broadcasting storm resistance function
n Support port isolation between different ports
n Support port flow control
n Support ACL to configure data packet filter flexibly
n Specialized design for system breakdown prevention to maintain stable system
n Support software online upgrading
n EMS network management based on SNMP ,convenient for maintenance
Product interface and LED definitions
Specification
|
Item
|
Parameter
|
|
PON Interface
|
1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM
|
|
User Ethernet
Interface
|
1*10/100/1000M auto-negotiation
Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance
|
|
Power Interface
|
An external 12V DC 0.5A power supply adapter
|
|
PON
Optical
Parameter
|
Wavelength: Tx:1310nm, Rx:1490nm
Tx Optical Power: 0～4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm
|
|
Data Transmission
Parameter
|
PON Throughput: Downstream 980Mbps; Upstream 950Mbps
Ethernet: 1000Mbps
Packet Loss Ratio: <1*10E-12
latency: <1.5ms
|
|
Business
Capability
|
Layer 2 wire speed switching
Support VLAN TAG/UNTAG，VLAN translation
Support Port-based speed limitation
Support Priority classification
Support storm control of broadcast
Support loop detection
|
|
Network
Management
|
Support IEEE802.3 QAM, ONU can be remotely managed by OLT
Support Remote management through SNMP and Telnet
Local management
|
|
Management
Function
|
Status monitor, Configuration management, Alarm management,
Log management
|
|
Shell
|
Plastic casing
|
|
Power
|
<4W, 12V/0.5A power supply adapter
|
|
Physical
Specifications
|
Item Dimension：130mm(L) x90mm(W) x 30mm (H)
Item weight：0.2kg
|
|
Environmental
Specifications
|
Operating temperature: 0 to 50oC
Storage temperature: -40 to 85oC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 10% to 90%(Non-condensing)
|
WIFI Specification
|
Item
|
Parameter
|
|
Performance parameters
|
Operating Mode
|
Router or bridge
|
|
Antenna gain
|
2*5dBi
|
|
Throughput
|
IEEE 802.11b: 11Mbps
IEEE 802.11g: 54 Mbps
IEEE 802.11n: 300Mbps
|
|
Frequency
|
2.412 ~ 2.472 GHz
|
|
Channel
|
13*Channel, configurable to meet the standard of USA, Canada, Japan and China
|
|
Modulation
|
DSSS , CCK and OFDM
|
|
Coding
|
BPSK, QPSK, 16QAM and 64QAM
|
|
RF receive sensitivity
|
802.11b:
-83dBm @ 1 Mbps; -80dBm @ 2 Mbps;
-79dBm @ 5.5 Mbps; -76dBm @ 11 Mbps
802.11g:
-85dBm @ 6 Mbps; -84dBm @ 9 Mbps;
-82dBm @ 12 Mbps; -80dBm @ 18 Mbps;
-77dBm @ 24 Mbps; -73dBm @ 36 Mbps;
-69dBm @ 48 Mbps; -68dBm @ 54 Mbps
802.11n 20MHz:
-74dBm @ 65 Mbps;
-70dBm @ 130 Mbps;
802.11n 40MHz:
-70dBm @ 135 Mbps;
-67dBm @ 300 Mbps;
|
|
RF output lever
|
802.11b:
17 ±0.5dBm @11Mbps
802.11g:
15 ±0.5dBm @ 54 Mbps; 16 ±0.5dBm @ 48 Mbps;
17 ± 1dBm @ 6 ~ 36 Mbps
802.11n 20MHz:
14 ± 0.5dBm @ 130 Mbps; 15 ± 0.5dBm @ 78 Mbps;
18 ± 0.5dBm @ 6.5 Mbps
802.11n 40MHz:
14 ± 0.5dBm @ 300 Mbps; 15 ± 0.5dBm @ 162 Mbps;
18 ± 0.5dBm @ 13.5 Mbps
|
|
Encryption Mode
|
802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK)
|
Network application
Figure: BD-ONU-111W Application Diagram