Site map    Tel:+86-21-37709251    Contact Us Chinese
4GE+1USB+1POTs+CATV+dualband wifi XPON ONU
BD-ONT-415WH-ac 4GE+1USB+1POTs+CATV+dual band wifi XPON ONU.

  Request price     Contact us

INFORMATION

Overview

   ●   BD-ONT-415WH-ac is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access .

   ●   BD-ONT-415WH-ac is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.

   ●   BD-ONT-415WH-ac adopts high reliability, easy management, configuration flexibility and good quality of service  guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X

Functional Feature

   ●   Support EPON/GPON mode and switch mode automatically

   ●   Support Route mode for PPPoE/DHCP/Static IP and Bridge mode

   ●   Support IPv4 and IPv6 Dual mode

   ●   Support 2.4G&5.8G WIFI and Multiple SSID

   ●   Support SIP Proctol for Voip Service

   ●   Support CATV interface for Video Service and remote control by Major OLT

   ●   Support LAN IP and DHCP Server configuration

   ●   Support Port Mapping and Loop-Detect

   ●   Support Firewall function and ACL function

   ●   Support IGMP Snooping/Proxy multicast feature

   ●   Support TR069 remote configuration and maintenance

   ●   Specialized design for system breakdown prevention to  maintain stable system

 

 


Hardware Specification

Technical item

Details

PON Interface

1 GPON BoBBosa on Board

Receiving sensitivity: ≤-27dBm

Transmitting optical power: +1~+4dBm

Transmission distance: 20KM

Wavelength

TX: 1310nm, RX: 1490nm

Optical Interface

SC/APC Connector

Design Scheme

RTL9607C+RTL8192FR(2.4G)+RTL8812ER(5G)+Si32192 BOB(RTL8290B)

RAM

2Gbit DDR3 

Flash

1Gbit SPI NAND Flash

LAN Interface

4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector

Wireless

Compliant with IEEE802.11b/g/n,ac

2.4G Operating frequency:2.400-2.4835GHz

5.8G Operating frequency:5.150-5.825GHz

2.4G 2*2 MIMO, rate up to 300Mbps

5.8G 2*2 MIMO ,rate up to 867Mbps

4 external antennas 5dBi

Support Multiple SSID

POTS interface

 FXS, RJ11 connector

Support: G.711/G.723/G.726/G.729 codec

Support: T.30/T.38/G.711 Fax mode, DTMF Relay

Line testing according to GR-909

CATV Interface

RF, WDM, optical power : +2~-15dBm

Optical reflection loss: ≥45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: 78dBuV

AGC range: -13~+1dBm

MER: ≥32dB@-15dBm

USB

Standard USB2.0

LED

11 LED, For Status of PWRLOSPONLAN1~LAN42.4G5.8G

Worn Normal(CATV)

Push-Button

2 ,For Function of Reset and WPS

Operating Condition

Temperature: 0~+50

Humidity: 10%90%non-condensing

Storing Condition

Temperature: -30~+60

Humidity: 10%~90%non-condensing

Power Supply

DC 12V/1A

Power Consumption

≤6W

Dimension

260mm×158mm×192mmL×W×H

Net Weight

0.35Kg

Storing Condition

Temperature: -30~+60

Panel lights Introduction

Pilot  Lamp

Status

Description

PWR

On

The device is powered up.

Off

The device is powered down.

LOS

Blink

The device doses not receive optical signals or with low signals.

Off

The device has received optical signal.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LAN1~LAN4

On

Port (LANx) is connected properly (LINK).

Blink

Port (LANx) is sending or/and receiving data (ACT).

Off

Port (LANx) connection exception or not connected.

2.4G

On

2.4G WIFI interface up

Blink

2.4G WIFI is sending or/and receiving data (ACT).

Off

2.4G WIFI interface down

5.8G

On

5G WIFI interface up

Blink

5G WIFI is sending or/and receiving data (ACT).

Off

5G WIFI interface down

Worn

(CATV)

On

Input optical power is higher than 3dbm or lower than -15dbm

Off

Input optical power is between -15dbm and 3dbm

Normal

(CATV)

On

Input optical power is between -15dbm and 3dbm

Off

Input optical power is higher than 3dbm or lower than -15dbm

Application

Typical SolutionFTTH(Fiber To The Home)

Typical BusinessINTERNETIPTVWIFIVOIPCATV etc

Figure: BD-ONT-415WH Application Diagram

RFQ:


Question:  Does ONU support transparent mode or trunk mode?
Answer: Usually ONU supports routing mode and bridge mode, trunk mode needs to be customized.



Ordering information


Related Products

1GE+1FE+CATV+2WIFI+1POTs XPON ONU

BD-ONT-412WT is designed as HGU (Home Gateway Unit) in different FTTH solutions.

1GE+1FE+1POTs+WIFI XPON ONU

BD-ONT-412W is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services.