INFORMATION
1. Overview
n BD-ONT-412W is
designed as HGU (Home Gateway Unit) in different FTTH solutions. The
carrier-class FTTH application provides different services.
n BD-ONT-412W is
based on mature and stable, cost-effective XPON technology.
n BD-ONT-412W
adopts high reliability,
easy management, configuration flexibility and good quality of service
guarantees to meet the technical performance of EPON Standard of China Telecom
CTC3.0 and GPON Standard of ITU-TG.984.X
2. Functional
Feature
n Support EPON/GPON mode and switch mode
automatically
n Support Route mode for PPPoE/DHCP/Static
IP and Bridge mode
n Support IPv4 and IPv6 dual mode
n Support 2.4G WIFI and Multiple SSID
n Support SIP Proctol for Voip Service
n Support LAN IP and DHCP Server
configuration
n Support Port Mapping and Loop-Detect
n Support Firewall function and ACL
function
n Support IGMP Snooping/Proxy multicast
feature
n Support TR069 remote configuration and
maintenance
n Specialized design for system
breakdown prevention to maintain stable system
3. Hardware
Specification
|
Technical item
|
Details
|
|
PON Interface
|
1 GPON BOB （Bosa on Board）
|
|
Receiving sensitivity: ≤-28dBm
|
|
Transmitting optical power: +1~+4dBm
|
|
Transmission distance: 20KM
|
|
Wavelength
|
TX: 1310nm, RX: 1490nm
|
|
Optical Interface
|
SC/UPC Connector
|
|
Design Scheme
|
RTL9603C+RTL8192FR+LE9643 BOB(RTL8290B)
|
|
Chip Spec
|
CPU 950MHz,DDR2 128MB
|
|
Flash
|
SPI NAND Flash 128MB
|
|
LAN Interface
|
1 x 10/100/1000Mbps(GE) and
1 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45
connector
|
|
Wireless
|
Compliant with IEEE802.11b/g/n,
|
|
Operating frequency: 2.400-2.4835GHz
|
|
support MIMO, rate up to 300Mbps,
|
|
2T2R,2 external antenna 5dBi,
|
|
Support: Multiple SSID
|
|
Channel: Auto
|
|
Modulation type: DSSS, CCK and
OFDM
|
|
Encoding scheme:
BPSK, QPSK, 16QAM and 64QAM
|
|
POTS interface
|
1 FXS, RJ11 connector
Support: G.711/G.723/G.726/G.729 codec
Support: T.30/T.38/G.711 Fax mode, DTMF Relay
Line testing according to GR-909
|
|
LED
|
1 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、 FXS
|
|
Push-Button
|
3,For Function of Reset, WLAN, WPS
|
|
Operating Condition
|
Temperature: 0℃~+50℃
|
|
Humidity: 10%～90%（non-condensing）
|
|
Storing Condition
|
Temperature: -30℃~+60℃
|
|
Humidity: 10%~90%（non-condensing）
|
|
Power Supply
|
DC 12V/1A
|
|
Power Consumption
|
≤6W
|
|
Dimension
|
155mm×92mm×34mm（L×W×H）
|
|
Net Weight
|
0.24Kg
|
4. Panel lights Introduction
|
Pilot Lamp
|
Status
|
Description
|
|
WIFI
|
On
|
The WIFI
interface is up.
|
|
Blink
|
The WIFI interface
is sending or/and receiving data (ACT).
|
|
Off
|
The WIFI
interface is down.
|
|
WPS
|
Blink
|
The WIFI
interface is securely establishing a connection.
|
|
Off
|
The WIFI
interface does not establish a secure connection.
|
|
PWR
|
On
|
The device is
powered up.
|
|
Off
|
The device is
powered down.
|
|
LOS
|
Blink
|
The device doses
not receive optical signals or with low signals.
|
|
Off
|
The device has
received optical signal.
|
|
PON
|
On
|
The device has
registered to the PON system.
|
|
Blink
|
The device is
registering the PON system.
|
|
Off
|
The device
registration is incorrect.
|
|
LAN1~LAN2
|
On
|
Port (LANx) is
connected properly (LINK).
|
|
Blink
|
Port (LANx) is
sending or/and receiving data (ACT).
|
|
Off
|
Port (LANx)
connection exception or not connected.
|
|
FXS
|
On
|
Phone has
registered to the SIP Server.
|
|
Blink
|
Phone has
registered and data transmission (ACT).
|
|
Off
|
Phone
registration is incorrect.
|
5. Application
n Typical Solution：FTTH(Fiber To The Home)
n Typical Business：INTERNET、IPTV、WIFI 、VOIP etc
Ordering information
Related Products
