Site map    Tel:+86-21-37709251    Contact Us Chinese
3 Ethernet over SDH STM-1 Converter
The Ethernet over SDH converter can provide one or two SDH STM-1 optical interface and three ethernet ports (two electrical port and one optical ethernet port). can support SNMP management.

  Request price     Contact us

INFORMATION

 Overview
The Ethernet over SDH STM-1 converter (EOS,EoSDH) provides one or two SDH STM-1 optical interface, two Ethernet interfaces, and a 100M 100M Ethernet optical port, the Ethernet packets directly encapsulated to the payload of SDH, SDH transmission network through long-distance high-speed Ethernet connectivity. The device has a standard STM-1 optical interface with any standard STM-1 optical interface, docking, direct access to the backbone network, or constitute a simple point to point network.

The ethernet over SDH (ethernet over STM-1) converter can be managed by SNMP network management.

 The ethernet over SDH coverter can support STM-1 optical port 1+1 protection.

 

Features

   ●   Standard STM-1 optical interface, which provides 1 +1 protection, single fiber transmission, wavelength and light power of different interfaces and other options;

   ●   Provides two Ethernet interfaces, and a 100M optical port, optical port can be independently Plug

   ●   Ethernet mapping adopts GFP/VC-12 virtual concatenated technology; according with MSTP criterion;

   ●   SNMP(10/100Base-T) network management port;

   ●   Standard 19 inch 1 unit box;

   ●   -48V DC or 220V AC power supply

   ●   Substrate program on-line update supported.

Specification

Index

Performance Parameter

SDH Interface

Max

1~2 STM-1 optical interfaces 1+1 protection supported

Connector

SC/PC

Spec.

S-1.1, L-1.1, L-1.2

Single fiber bi-directional interface can be optionally supported

Service interface

Ethernet port

210/100Base-Tx

Comply with IEEE 802.3

Management

Protocol

SNMP

Interface

10Base-T

Physical Dimension

1U: 440 × 44 ×138 (mm)

Power

Supply

-48V DC or 220V (110V) AC or dual power supply

+24VDC

Consumption

≤8w

Environment

Temperature

0°C50°C

Humidity

90 %


Typical Application:

The Ethernet/STM-1 converter work as either in the point to point network or in other complicated network topologies inter-working with other MetroEdge Express products. It is mainly used in access layer network to supply STM-1 and Ethernet access. The typical application as below:

 

Ordering information


Related Products

Gigabit Ethernet to STM-1 Converter

Gigabit ethernet over STM-1,four Gigabit ethernet,two STM-1

Multiservice SDH Platform with 6Ethernet

6*100M ethernet+16E1 over SDH STM-1