Site map    Tel:+86-21-37709251    Contact Us Chinese
16Ch High Power Fiber Amplifier Multi Output CATV EDFA Optical Amplifier
The high power fiber amplifier is a high power multi-output edfa fiber optical amplifier, specially designed for FTTH and CATV system applications.

  Request price     Contact us

INFORMATION

The high power fiber amplifier is a high power multi-output edfa optical amplifier, specially designed for fiber-to-the-home and CATV fiber-optic system applications. The high power amplifier has a built-in high-tech laser and adopts LG switch circuit design, which can greatly reduce the power consumption and heat generation of the equipment. The preamplifier inside the high power fiber amplifier does not need to be cascaded with EDFA, and the input light can be as low as -5dBm, which can reduce CNR and MER deterioration. The catv high power amplifier is a gain-type fiber amplifier that can realize single-wavelength cable TV transmission, CWDM single-fiber three-wave, DWDM and flat gain. It is an excellent low-cost solution for large-scale coverage of CATV systems and high-density FTTH homes.

Features

  • EDFA Optical Amplifier Adopts world top brand pump lasers and the OFS fiber of United States, advanced LG switch low-power circuit design, greatly reducing the overall power consumption and heat.
  • Perfect APC, ACC, ATC control, users use in different networks, good ventilation design and temperature-controlled fan, ensure the long life and high reliability of PUMP laser.
  • High Power Fiber Amplifier Using digital control chip, remote or local output power adjustable.
  • Excellent protection circuit design, with light detection, optical return loss monitoring. Great protection of lasers and light path safety.
  • Built-in low-noise preamplifier eliminates the need for cascaded EDFA, allowing input light to be as low as -5dBm, greatly reducing CNR and MER degradation.
  • Demultiplexer for 1310/1490/1560nm EPON and GPON. It greatly facilitates network applications with PON. Low noise figure (type ≤ 4.5dB, Max ≤ 5.0dB);
  • The total output optical power is optional: 2-10W (33-40dBm);
  • The front panel can be removed and replaced flexibly according to the number of output ports; Can add a built-in optical switch module to facilitate the expansion of the device function; Cooling fan supports online replacement;
  • The front panel LCD provides the operating parameters and alarms of the entire unit. RJ45 provides serial communication and SNMP network management interface; Carrier-grade dual power hot backup, CPU assignable powe

Applications

The high power fiber amplifier is a high power multi-output optical fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH coverage of CATV systems in large and medium-sized cities.

The high power amplifier can achieve single-wavelength cable TV transmission, CWDM single-fiber three- wave, flat-gain type, DWDM. Its reliable and excellent performance ratio between the main application of FTTH, FTTB, DBS, MMDS, FTTX pon, is to build CATV large Medium-sized optical fiber transmission network is an important equipment.

Block diagram

high power fiber amplifier block diagram



 


Limit parameter

Technical parameters

BD-EDFA-4516

Max wavelength

1535-1565nm

Minimum input power

-10dBm

Max input power

+10dBm

Limited working temperature

-25~+70

Limited working voltage

AC90~265V&DC30~72V&DC30~72V

High Power Fiber Amplifier Technical parameters

Technical parameters

 

Wavelength

1535-1565nm

Input power

-5dBm~+10dBmnormal input -2dBm~+5dBm

Output power

33dBm~40dBmWDM -1dBm

Output port

SC: 16/32/64LC: 32/64/128

Each output power

10~23dBm or customized

Noise

5.0dBPin=0dB

Polarization dependence loss (PDL)

0.3dB

Polarization dependence gain (PDG)

0.4dB

Polarization mode dispersion

(PMD)

0.3dB

Pump leakage power

-30dBm

Echo loss

56dB

Optical connector

SC/APC&SC/UPC&LC/APC&LC/UPC

Supply voltage

220V(AC90V~265V)&110V(AC90V-130V)&48V(DC30~72V)

Consumption

100w

Working temperature

-5~+42

Storage temperature

-40~+80

Working relative humidity

5~95%

Product net size

465(L)*480(W)*89(H)

Package dimension

640(L)*640(W)*200(H)

high power fiber amplifier easy to replace power supply





 
high power fiber amplifier good design

 
high power fiber amplifier fan good

 



Ordering information


Related Products