Site map    Tel:+86-21-37709251    Contact Us Chinese
POTS FXO/FXS to Ethernet Converter, Transmit 16 POTs FXS over IP Ethernet Extender
16 POTS to ethernet converter is a kind of point-to-point device, which transmit 16channel analog POTs fxo/fxs over IP ethernet.Two 100M Ethernet ports and one optical ethernet port (SFP slot)

  Request price     Contact us

INFORMATION

POTs to Eterhetn Converter Functions:

16 POTS to ethernet converter is a kind of point-to-point device, which transmit 16channel analog POTs fxo/fxs over IP ethernet. The pots over IP extender encapsulates voice data in IP data packets and supports UDP encapsulation to realize the conversion of 1-16 voice services to two 100M electrical Ethernet and one optical ethernet networks. It can communicate on the same network segment or different network segments via routers. The device is designed by cost-effective solution, which reduce much project cost than VOIP gateway solution.

Features:

  • The pots to ethernet covnerprovide Console (RS232) /web management interface convenient for installation;Ethernet interface rate of 10M / 100M full / half duplex adaptive;
  • support automatic recovery after power off or network off ;
  • support Ethernet packet disorder recovery and cache to resist network delay;
  • adjustable frame length to balance the bandwidth and transmission delay;
  • based on hardware design quick start;
  • Voice port support FXO/FXS / two /four-wire EM / two-wire audio / magnet telephone interface FXO port and program-controlled switches docking FXS port and the user's telephone connected;
  • Voice FXO/FXS access support for caller ID function / reverse polarity billing / fax function;
  • telephone interface support mutual number allocation function;
  • Support Console serial port network management and WEB network management;A variety of power options: AC220V DC-48V / DC24V etc . support AC + DC; AC + AC; DC + DC dual power backup mode

POTs over IP Extender Specification

  • Ethernet interface(10/100M)

Interface rate 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Capability 4096
Connector RJ45, support Auto-MDIX

  • POTs to Ethrenet converter FXS Interface

Ring voltage 75V
Ring frequency 25HZ
Two-line Impedance 600 Ohm (pick up)
Return loss 40 dB

  • FXO Switch Interface

Ring detect voltage 35V
Ring detection frequency 17HZ-60HZ
Two-line Impedance 600 Ohm (pick up)
Return loss 40 dB

  • EM 2/4 Line

AD 0dB
DA 0dB
Two/Four-line Impedance 600 Ohm
Return loss 20 dB

  • Working environment

Working temperature -10°C ~ 50°C
Working Humidity 5%~95 % (no condensation)
Storage temperature -40°C ~ 80°C
Storage Humidity 5%~95 % (no condensation)

  • Power supply

Functional Description 16 channel POTs FXS over IP Ethernet extender, Internal power AC220V/DC48V/DC24V can be optional
Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤20W

Dimension Product Size:   19inch  485mmx200mmx45mm(WxDxH)
Weight 2.4KG

 



Ordering information


Related Products