INFORMATION
Overview
TDMoIP-V35 is
mainly used to transmit V.35 interface over IP network. It has V.35
interface, 2 UTP Ethernet port and 1*fiber Ethernet port. TDMoIP-1E can connect
TDM device and user’s low cost wireless
or lineate Ethernet/IP configuration, without affecting the quantity. assures
connecting to physical V.35 interface of any device seamlessly, It can be used
in the communication system based on V.35, such as LAN, WAN, MAN and wireless
network.
Providing emulation V.35 channel through Ethernet, the difficulty is
rebuilding timing information of V.35 code stream effectively at the exit of
network. The special disadvantages of Ethernet itself, such as random packet
delay, without effective timing transmit mechanism, transmission error or
collision that brings on packet lose, must be conquered. Our company resolves
the difficulties above faultlessly through availing ourselves of technical
advantage and adapting advanced clock disposal technology. TDMoIP-V35
encapsulates the date of V.35 code stream to the packet and transmits it to the
remote device through Ethernet.
Features
● High transmit efficiency, low transmit
delay.
● Provide 1*V.35 channels and
2*10/100Base-TX and 1*100Base-FX interface.The length of Ethernet packet can be
set, supporting huge packet.
● User can select IP protocol
encapsulation or simplicity Ethernet type.
● Support VLAN setting.
● Support Ethernet ping function.
● Support package loss indicator function
for V.35 transmission line.
● Have three Loop Back Mode: Ethernet
interface Loop Back (ANA)、V.35 interface Loop
Back(DIG)、Command the remote V.35 interface
Loop Back(REM)
● Have pseudo random code test function,
easily line opened, can be used as a 2M BER Tester
● V.35 interface supports hot-plug,
supports DTE or DCE device interconnection
● Provide 3 clock types: Internal clock,
External clock, slave clock;
● Point to point or point to multi-points
connections, satisfying different applications.
● High efficiency transmission, up to 90%
bandwidth utility ratio.
● 10/100M Ethernet, full/half duplex
auto-adapt, support auto-MDIX.
● When selecting network adaptation
clock, it can resume the original clock accurately through TDM clock resumption
mechanism, stable clock, little jitter and small excursion, conforming to ITU-T
clock jitter and excursion standard.The device Support WEB management
platform, online software upgrades, the host side can manage the work of each
state machine equipment;
- Ethernet interface(10/100M)
Interface rate: 10/100 Mbps, half/full duplex auto-negotiation
Interface Standard: Compatible with IEEE 802.3, IEEE
802.1Q (VLAN)
MAC Address Capability: 4096
Connector: RJ45, support Auto-MDIX
V.35 interface
Interface rate: 2048Kbps
Interface Standard: Compatible with V.35 Standard
Connector: DB25
Connect Mode: DCE
Clock Type: G.703 restored clock, Internal clock
Working environment
Working temperature: -10°C
~ 50°C
Working Humidity: 5%~95 % (no condensation)
Storage temperature: -40°C
~ 80°C
Storage Humidity: 5%~95 % (no condensation)
Appliaction
Ordering information
Related Products
