INFORMATION
Product Overview
BD-MUX04-LMXE.V8
is a carrier-class, cost-effective, compact, high-capacity SDH &IP Network integrated
transmission platform that is designed for application in metro and access
networks to facilitate the efficient transport of traditional TDM and
increasing Ethernet data traffic for service providers. Multiple services can
be transported over SDH network and IP metro network easily via BD-MUX04-LMXE.V8.
Both SDH Cross-connection Matrix and Packet Switching Core are supported.
BD-MUX04-LMXE.V8
is a card based compact SDH &IP Network integrated equipment, designed
mainly as a gateway node between the core SDH/IP network and a number of remote
CPE boxes. It may also be used as a multi service SDH ADM node in a typical
ring or mesh network. The 3U high 19” wide chassis of the BD-MUX04-LMXE has 19
slots, with 2 slots for the 1+1 power cards, 1 slot for network management
card, 2 slots for TDM cross-connection cards, 2 slots for Packet switching
cards, and 12 slots for universal service cards.
BD-MUX04-LMXE.V8
supports multiple SDH network features as follows:
l Support 1+1 MSP, SNCP
protection
l Management channel
can be DCC/E1/VC12
l Support up to STM-16
l E1 BERT test is
embedded
l Internal clock/external
clock/line clock/clock holdover
l Ethernet service
supporting GFP encapsulation, VC12 virtual concatenation and LCAS, P VLAN, 802.1Q
VLAN and QinQ
l Large cross-connect
matrix capacity is 96*96 VC-4 VC-4 level full cross connection or 32*32 VC-4
VC-12 or VC-3 level full cross connection
l 192 remote site’s
Ethernet over 8*E1 aggregation
l 756 remote site’s
Ethernet over 1*E1 aggregation
l 192 Ethernet over SDH
aggregation
BD-MUX04-LMXE.V8
supports multiple Packet-switching network features as follows:
l 1+1 Redundancy for
Ethernet Aggregation Cards
l Support LACP, 802.1Q,
QinQ, xSTP, etc.
l Support Carrier Class
OAM (IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731)
l Support SAToP
l Support RMON
l Ethernet Aggregation
of 48 remote Ethernet CPEs.
BD-MUX04-LMXE.V8
supports the following services on different ports:
l STM-1o/STM-1e/STM-4/STM-16
l GE/FE(Optical and
Electrical)
l E1/V.35/E3/DS3
Digital subscriber line access
Hardware Architecture
Slot
description:
BD-MUX04-LMXE.V8
is composed of SDH cross-connection cards, IP packet switching cards, and tributary
service cards. There are 19 slots, including 2 slots for hot standby power
cards, 1 slot for management card, 2 slots for SDH cross-connection cards, 2
slots for IP packet switching cards, and 12 slots for tributary cards.
Features
|
Cross-connection
Capacity
|
High Order: 96*96 VC4s
Low Order: 2016*2016 VC12s
|
|
Cross-connection
mode
|
Bidirectional,
Unidirectional, Multicast/broadcast and loopback
|
|
Packet
Switching Capacity
|
3.6Gbps
|
Specifications
|
Index
|
Performance Parameter
|
|
Uplink Capacity
|
8×STM-1o, or 4×STM-1e, or 4×STM-4,
or 4×STm-16
|
|
Connector
|
SC/PC or FC/PC
|
|
Spec.
|
S-1.1, S1.2, L-1.1, L-1.2, S4.1, S4.2,
L4.1, L4.2, S16.1, S16.2, L16.1, L16.2
|
|
Dual/Single fiber bi-directional
interface are optional
|
|
Uplink Capacity
|
4×GE electrical or optical
interface
|
|
Connector
|
RJ-45,
SC/PC(SFP Optical Module,
transmission distance is optional)
|
|
Spec.
|
1000Base-TX, 1000Base-FX
|
|
PWR01A
|
DC-48V Power card, 1+1 hot-standby,
maximum power is 100W
|
|
PWR01C
|
DC -48V Power card, 1+1
hot-standby, maximum power is 200W
|
|
PWR02A
|
AC 220V Power card, 1+1 hot-standby, maximum power is
100W
|
|
PWR02C
|
AC 220V Power card, 1+1 hot-standby, maximum power is
200W
|
|
PWR02B
|
AC 110V Power card, 1+1 hot-standby, maximum power is
100W
|
|
PWR02E
|
AC 110V Power card, 1+1 hot-standby, maximum power is
200W
|
|
NM80
|
Network Management Card
|
|
OX01A
|
Dual STM-1 aggregation optical
card, Cross-Connection Matrix Card embedded
|
|
OX01Q
|
Four STM-1 aggregation optical
card (SFP),Cross-Connection Matrix Card embedded
|
|
OX01S
|
Dual STM-1 aggregation optical
card (SFP), Cross-Connection Matrix Card embedded
|
|
OX04A
|
Dual STM-4 aggregation optical
card (SFP), Cross-Connection Matrix Card embedded
|
|
OX16A
|
Dual STM-16 aggregation optical
card (SFP), Cross-Connection Matrix Card embedded
|
|
EX01
|
Dual STM-1 aggregation electrical
card, Cross-Connection Matrix Card embedded
|
|
DX01
|
SDH Cross-Connection Matrix Card,
no interface
|
|
DX02
|
DS0
level cross connection, no
interface
|
|
PX01
|
Packet
Switching card, with 2GX/GE combo interfaces
|
|
OS01
|
Dual
STM-1 tributary optical card, SC or FC
|
|
OS01S
|
Dual STM-1 tributary optical
card, SFP
|
|
OS02
|
2 Ethernet +Dual STM-1 tributary
optical card
|
|
OS02A
|
2 Separate Ethernet +Dual STM-1
tributary optical card
|
|
OS03
|
1 Ethernet +Single STM-1
tributary optical card
|
|
OS04A
|
Dual STM-4 tributary optical card
|
|
OP02
|
2×E1+1×V.35 PDH card
|
|
OP03
|
2×E1+1×100Base-Tx PDH card
|
|
OP05
|
4×E1+1×100Base-Tx PDH
card
|
|
OP06
|
4×E1 PDH card
|
|
EP01
|
24×E1 (75W or 120W RJ45, occupies 2 slots)
|
|
EP01A
|
24×E1 (120W, DB60)
|
|
EP03
|
12×E1 (75W or 120W RJ45)
|
|
EP03A
|
12×E1 (120W, DB60)
|
|
EP03C
|
12×E1
|
|
EP02
|
1×E3/DS3
|
|
ED01
|
Dual V.35
|
|
FE01
|
4 FE over 4 VCG trunks (EoS)
|
|
FE02
|
4 FX over 4 VCG trunks (EoS), SFP
|
|
FE04
|
4 FE over 1~16E1 (EoE)
|
|
FE05
|
4 FX over 1~16E1 (EoE), SFP
|
|
FX01
|
4 FX Switching
|
|
EA21
|
EOS,
Ethernet aggregation, aggregation ratio: 16:1, no outer Ethernet port
|
|
EA22
|
EOE,
Ethernet aggregation, aggregation ratio: 16:1, no outer Ethernet port
|
|
EAS22
|
Standard EOE, Ethernet aggregation,
aggregation ratio: 16:1, no outer Ethernet port
|
|
GE01
|
2 GE Opitcal/Electrical port over 2
VCGs Trunk (VC-4 Level)
|
|
PW04
|
4xE1 Pseudo Wire card(SAToP), with
4xE1 interfaces
|
|
PW12
|
12xE1 Pseudo Wire card(SAToP), no E1
interface
|
|
LA01
|
Order wire and external clock card
|
|
DSL01
|
1 FE over
VC-12 + 1 Digital
subscriber line access
|
|
DSL02
|
1 E1/V.35
over VC-12 + 1 Digital
subscriber line access
|
|
Max E1
|
288 E1
|
|
Max E3/DS3
|
12 E3/DS3
|
|
Interface
|
10/100Base-Tx or 100Base-Tx,
Comply with IEEE 802.3
|
|
Maximum
|
48 FE ports (14 FE01 or FE02
cards support)
|
|
Encapsulation
|
Comply with ITU-T G.7041 (VCAT,
GFP, LCAS)
|
|
Max Interface
|
24 V.35 interfaces (framed or
unframed) DCE/DTE
|
|
Uplink by STM-1
|
High order 20×20 VC-4s
Low order 1260×1260 VC12s
|
|
Uplink by STM-4
|
High order 32×32 VC-4s
Low order 2016×2016 VC-12s
|
|
Uplink by STM-16
|
High order 96×96 VC-4s
Low order 2016×2016 VC-12s
|
|
Uplink by GE/GX
|
IP switching capacity of 3.6Gbps
|
|
Interface
|
10/100
Base-T (can be cascaded)
|
|
Standard socket RJ11
|
|
3U:
136 × 240 ×440 (mm)
|
|
Supply
|
-48V DC or dual power supply
|
|
Consumption
|
≤100W
|
|
Temperature
|
0°C~50°C
|
|
Humidity
|
≤90
%(non-condensing)
|
|
≤8 kg
|
Typical
Application
Application1:
STM1 over GE,point to multipoint application
Application2:
GE and E1 over 10G network transmission
Application3:
SDH network and IP network conversion transmission
Standard
Compliance
Items
Standards and
Protocols
SDH Interface
ITU-T
G.957, G.707
E1 port
ITU-T
G.703,
G.704
Clock port
ITU-T G.823
Ethernet port
IEEE 802
G.7041/G.704
2/G.7043 and G.8040
Ordering information
Related Products
