Site map    Tel:+86-21-37709251    Contact Us Chinese
16E1 over Ethernet Multiplexer - Point to Multi-point Equipement
16E1 over Ethernet Multiplexer, central site, Point to Multi-point Equipement

  Request price     Contact us


16E1 over Ethernet multiplexer is mainly used to transmit voice signal over IP network. It has 8*E1 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. The 16E1 IP multiplexer can connect TDM device and user’s low cost wireless or lineate Ethernet/IP device, without affecting the voice quantity. It assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling device and voice mail system. It can be used in the communication system based on E1, such as LAN, WAN, MAN and wireless network. Providing emulation E1 channel through Ethernet, the difficulty is rebuilding timing information of E1 code stream effectively at the exit of network.16*E1 over Ethernet IP special disadvantages of Ethernet itself, such as random packet delay, without effective timing transmit mechanism, transmission error or collision that brings on packet lose, must be conquered. Our company resolves the difficulties above faultlessly through availing ourselves of technical advantage and adapting advanced clock disposal technology. The 16E1 TDMoIP equipement encapsulates the data of E1 stream to the packet and transmits it to the remote device through Ethernet.

The 16E1 over ethernet multiplexer can support point to point application (two 16E1 device work together) or point to multi-point application (the 16E1 multiplexer in the central site work with 1E1/2E1/4E1 TDM over IP in remote sites).


  • Provide 1-16E1 channels interface transparently, confirming to ITU-G.703.
  • High transmit efficiency, low transmit delay.
  • Provide 16*E1 channels and 2*10/100/1000Base-TX and 1*1000Base-X interface.
  • The length of Ethernet packet can be set, supporting huge packet.
  • User can select IP protocol encapsulation or simplicity Ethernet type.
  • Support VLAN setting.
  • Support Ethernet ping function.
  • Support package loss indicator function for E1 transmission line.
  • Local and remote E1 loop and local E1 enable function.
  • Point to point or point to multi-points connections, satisfying different applications.
  • High efficiency transmission, up to 90% bandwidth utility ratio.
  • Support two type interfaces-75Ω and 120Ω-unneed setting.
  • 10/100/1000M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
  • When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
  • The device SupportWEB management platform, online software upgrades, the host side can manage the work of each state machine equipment;


Ethernet interface(10/100/1000M)

  • Interface rate: 10/100/1000 Mbps, half/full duplex auto-negotiation
  • Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
  • MAC Address Capability: 4096
  • Connector: RJ45, support Auto-MDIX

E1 Interface

  • Standard:      conform to G.703 standard
  • Code rate:     2.048Mbit/s±50ppm
  • Code type:     HDB3
  • Impendence: 75Ω(unbalance)/ 120(balance)
  • Connector: BNC(unbalance)/ RJ45(balance)
  • Jitter tolerance:  conform to G.742 and G.823

Working environment

  • Working temperature: -10°C ~ 50°C
  • Working Humidity: 5%~95 % (no condensation)
  • Storage temperature: -40°C ~ 80°C
  • Storage Humidity: 5%~95 % (no condensation)


BD-16E1-IP-CON 16E1 over ethernet multiplexer

Functional Description

16*E1 over Ethernet ,Internal power AC220V/DC48V/DC24V can be optional 


Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤10W





point to point application

16E1 ove ethernet point to point application
convergency point to multi-point application
16E1 ove ethernet point to point application

Ordering information

Related Products