INFORMATION
Baudcom new G.703/G.704 toolless insulating displacement connecting (IDC) module baluns are ideal for carriers seeking a cost-effective, space-efficient, and proven method of impedance matching 75ohm coax to 120ohm single-conductor connections. The baluns provide transparent bi-directional signal conversion with no AC or battery power required.
Various industry standard types of coaxial connectors (75 Ohm) are available including male and female combinations of BNC, 1.6/5.6, 1.0/2.3, and Type 43. The 3-pole toolless IDC connector used for wrapping single-conductor connections (120 Ohm) utilizes a slit in the cable anchor to allow the cable to be inserted after termination. The toolless IDC connector is also offset so that a cable can be positioned between baluns on the DDF/patch panel as required. The toolless IDC connector is clearly labeled A, B, and G (Ground) to make installation more convenient.
 |
 |
| type43 female IDC balun |
type43 male IDC balun |
 |
 |
| BNC female IDC balun |
BNC male IDC balun |
 |
 |
| 1.6/5.6 female IDC balun |
1.6/5.6 male IDC balun |
-
Convert 75 Ohm Coax to 120 Ohm Twisted Pair--Resolves impedance mis-match between twisted pair equipment and coax cabling
-
Ultra-miniature size--Provides maximum density when installed into a 19-inch (48.3cm) panel
-
Industry Standard Coax Connectors--A host of coax connectors including BNC, 1.6/5.6, 1.0/2.3 and Type 43 are available
-
Low Insertion Loss--Fully meets ITU-T (CTR-12) G.703 standards
-
No Power Required--Operation is transparent to data, no AC/DC power is required
|
|
|
|
Ordering information
Related Products
