INFORMATION
Description:
Baudcom provides 10Gbps Ethernet media converter
between SFP+ to UTP,and XFP to UTP.No matter what kind of media applied for
10Gbps Ethernet,it used to be the fiber as the media for transmission.10G Ethernet standalone and module cards,
brings you the best and simple solution for the Ethernet conversion between
media of copper wire and fiber, with the speed of 10G.
The 10G Ethernet media converter’s module card allows you to cascade multiple BD10 2U
Rack (16 channel) chassis for managing at the same time.
With various Interface:
SFP+ to RJ45
XFP to RJ45
10G ethernet media converter SFP+ card
10G ethernet media converter XFP card
Application:
1.Connection
between fiber to copper 10Gbps Ethernet equipment
function as fiber-to-copper
media converter for long distance
transmission
2.Media
converter for network backbone(SAN, LAN, MAN)
3.Can
be applied in Telecommunication room, R&D laboratory, Data center, and etc.
Features：
●Support
Jumbo Frame
●Transparent
Transport and very low delay
●Support
ITUT prescribed DWDM/CWDM wavelength
●Support
DMI function for SFP+/XFP fiber module
●Support
Loopback test function
●Economic
In-band Management function
●Powerful
Network Management function（Web，SNMP，Console）
●Support
hot plugging
●Support
2U Rack (16 channel) and standalone use
●Full State Led display
●Easy
installation
●UTP
cable length detection（only RJ45 interface）
●Providing
protections against lighting and static electricity for
Ethernet network and the network main
system
Technical Specification:
|
Model
|
|
Module Card
|
BD-10G-SFP+
|
BD-10G-XFP
|
|
Interface
|
PortA
|
SFP+
|
XFP
|
|
PortB
|
RJ45
|
RJ45
|
|
Transmission Speed
|
10Gbps
|
10Gbps
|
|
Data
|
Technical Indexes
|
|
|
|
Protocol
|
IEEE802.3an(10Gbase-
T),IEEE802.3ae(10Gbase-
SR/LR/ER/ZR)
|
Access
Type
|
10G LAN
|
|
Transmission
Distance
|
SFP+ module: Up to 80Km
10G base-T: 100meters Cat .6a cable
|
|
Maximum
Packet
Forwarding
Rate
|
14,880,950/S
|
|
Network management
information:
|
• Card type information
• SFP+ or XFP fiber module
detection
• SFP+ or XFP fiber module DMI
function (Temperature,Voltage,Optical power ）
• Link status detector
•Enable/Disabled Loopback test
function
• Enable/Disable PRBS
Generator and checker function
• Rate select （ 10Gbase-Lan
or Wan ）
• Remote card's status monitor（only in pairs ）
|
|
Power requirement
|
Rack-mountable : AC 85 ～ 220V
OR DC -48V
Standalone: AC 220V OR DC -48V
Power consumption: ≤9W
|
|
Work
Environment
|
Operating
Temp: 0~ 50 ℃
Storage
Temp: -10~ 70 ℃
Humidity:
5%~90% （ non-condensing ）
|
|
Dimension
|
Card
：11.5mm(W)×78mm（D）
Standalone:156mm（W）×128mm（D)×32mm（H）
|
|
|
|
|
|
Ordering information
Related Products
