INFORMATION
Overview
The integrate EOC Master have two EOC master module and one ONU module.EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-ONU built in a ONU. The module supports IEEE 802.3ah standards. It provide one SC/PC optical EPON uplink port and two 10/100/1000M auto-negotiable Ethernet RJ45 ports. By using the EPON technology, the ONU Module can provide a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.
The EOC Master Module is based the AR7410 chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
The ONU module connects with the EOC module, Ethernet data signals will be modulated into RF signals to transmit in the coaxial cable. BD-2EOC-ONU integrating EOC and ONU can reduce the number of active node, decreasing failure rate and saving a space. It is the best choice of EPON+EOC solution for the operator.
Function Features
● High integration with two EOC Master modules and one ONU module
● Aluminum alloy die casting shaping, good heat dissipation
● Outdoor waterproof designed, 60V/220V power supply optional
● 7.5-65Mhz frequency for EOC signals., no influence on CATV Service
● Support data encryption
● Support broadcast storm limitation
● Support data packet statistics
● Support auto-update and auto-configuration
● Support Dynamic Bandwidth Allocation (DBA)
● Support ONU auto-discovery/Link detection/remote upgrade of software
● Support Port-based VLAN and IEEE802.1Q VLAN
● Support performance statistics based on ports
● Support ACL achieve the purposes of access control
● Support various LLID configuration and single LLID configuration. Different user and different service could provide different QOS by means of different LLID channels
● EMS network management based on SNMP
Specification
|
Item
|
Parameters
|
Specification
|
|
Specification of EOC Module
|
|
Interface and LED Indicator
|
RF Port
|
1*EOC low-frequency signal output port, support F- Female or SMB connector
|
|
Ethernet Port
|
2*2 10/100/1000Mauto-negotiation, RJ45
|
|
LED Indicator
|
2*1 for Power Supply Status
2*1 CABLE Link Status indicator
2*2 for Ethernet Ports Status
|
|
Performance Parameters
|
RF Parameters
|
Frequency Band :7.5-65MHz
RF Output Level:110±5dBuv
Receive sensitivity:45dBuv
Return Loss:>16dB
Output Resistance:75Ω
|
|
Transmission
|
PHY Layer:600Mbps
Throughput on MAC Layer:320Mbps
|
|
Modulation Mode
|
OFDM– 2690-carriers 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO
|
|
Working Mode
|
TDMA/CSMA
|
|
Encryption Mode
|
AES-128
|
|
Standard
|
EOC Standard
|
IEEE P1901(Draft)
HomePlug AV
|
|
Ethernet Standard
|
IEEE 802.3, IEEE 802.3x, IEEE 802.3u
IEEE802.1P, IEEE802.1Q
|
|
Software
|
Network Management
|
WEB, CLI, SNMP
|
|
Software Features
|
VLAN, QOS, Bandwidth Control, Broadcast storm limitation
|
|
Specification of ONU Module
|
|
Interface
|
PON Interface
|
One EPON port
Meet 1000BASE-PX20+ standard
Up to 1.25Gbps Upstream and Down-stream
SC Connector
Single-mode fiber, single-strand
Maximum split ratio 1:64
Up to 20Km distance @ 1:32
|
|
Ethernet Interface
|
Two 10/100/1000Mauto-negotiation
Full/Half-Duplex
RJ45 type connector , Auto MDI/MDI-X
Up to 100m distance
|
|
Performance Parameters
|
PON Optical Parameters
|
Wavelength: Upsteam1310nm, Downstream 1490nm
Transmitter Optical Power: 0～4dBm
Optical Receive Sensitivity: -27dBm
Saturation Optical Power：-3dBm
|
|
Data Transfer Parameters
|
Data Transfer Rate: Upstream 900Mbps；Downstream 950Mbps
LAN Interface: 1000Mbps
Packet Loss：<1*10E-12
latency：<1.5ms
|
|
Business Capability
|
Layer 2 wire speed switching
Support VLAN TAG/UNTAG，VLAN conversion
Support Port-based speed limitation
Support Priority classification
Support storm control of broadcast
|
|
Network Management
|
Management Mode
|
Support IEEE802.3 QAM, ONU can be remotely managed by OLT
Support Remote management through SNMP and Telnet
Local management
|
|
Function
|
Status monitor, Configuration management, Alarm management, Log management
|
|
Indicator
|
Indicator Description
|
PWR: Power up or down
LOS: Optical Link Status
PON：ONU registered
LNK: Link Status
|
|
Physical Features
|
|
Physical Features
|
Power supply & Consumption
|
Power Supply：220V/60V optional
Consumption：<17W
|
|
Size & Net weight
|
Dimension：290×220×120mm
Weight：3.5kg
|
|
Environment Attribute
|
Working Temperature：－10～65℃
Storage Temperature：-40～85℃
Working humidity：10%～85%non-condensing
Storage humidity：10%～90% non-condensing
|
Typical Application
● CATV
● Internet Access
● VOD
● IPTV
● Camera monitor system
Ordering information
Related Products
