INFORMATION
Product Overview:
As a cost effective solution for the traditional telecom services migrate
to the IP packet networking technology, BD-16E1-IP adopts the innovative TDM
over IP technology, with IP circuit emulation that supports transportation of 16
E1 over FE port. The uplink ports and user data ports are IEEE 802.3 compliant,
10/100 auto-sensed Ethernet ports.
State-of-the-art design provides the
highest availability with the accurate timing signal and data bit stream
reconstruction. Predefined system parameter profiles that according to
different application requirement; ultimately simplify the installation process
and saving the maintenance cost.
The 16E1 TDM over IP converter provide 2
power supply, 16 E1,2FE uplink 2FE downlink and one optical FE SFP slot.
Telecom and Enterprise users can save a lot of access and
equipment costs and generates new revenue by offering different types of
service over existing Ethernet networks. It is also suitable for connecting to
the wireless equipment to achieve fast deployment of E1 services. One
particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave
radios.
Features
1. Support IETF RFC4553
SAToP protocol, Ethernet encapsulation
support IP/UDP.
2. Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2
user data ports or monitoring ports, optical port can be used for uplink or
user data.
3. User-friendly Web server supported for easy setup and maintenance
4. Support SNMP V1/V2 network management
5. E1 clock supports 3 mode: local clock, adaptive and loopback
6. E1 service support lossy and lossless protection
7. E1 support local and remote loops
8. Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based
and QinQ based), QoS(port based、8021.1P based、MAC
based and TOS based).
9. Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet
ring protection, OAM and MAC address automatic learning
10. Ethernet packet size up to 9720byte
11. Support point to point (working pair, one at each
end of the network) and point to multipoint application
12. Local Ethernet port throughput limiting
13. Software and hardware online upgrade
14. Power supply redundancy
15. 120Ω balanced E1/T1 port, RJ-45 connector, support 75Ω unbalanced
port through outside converting cable.
16. Support cascade concatenate for more than 16 E1 ports
Technical Specifications
|
Item
|
Description
|
|
Model
|
BD-16E1-IP
|
4 Ethernet
electrical ports and 1 ethernet optical port(SFP Slot), 16 E1s
|
|
Interfaces
|
IP
ports
|
4 FE
electrical ports and 1 FE optical port Comply with IEEE 802.3, 802.1Q, 802.1P,
802.3x
Speed and half/full duplex auto-negotiation or manual
Auto MDI-X,RJ45 female connector
|
|
E1
Ports
|
16 E1 Ports Supported
Comply with ITU-T G.703 G.742 standard
Impedance: 120ohm(balanced,RJ45
connector)
or 75ohm(unbalanced,BNC
connector)
Rate: 2.048Mbps
Code: High
Density Line Code Bipolar-3 (HDB3).
|
|
Optical Port
(SFP module is not included in the normal device)
|
Fiber type: Single fiber or
dual fiber
Wavelength: 850nm/1310nm/1550nm
Optical connector: LC or SC
Transmission distance: 2km/20km/80km/100km
Rate: 100Mbps
Code: non-return-to-zero
(NRZ)
|
|
NM
port
|
Same
as IP ports
|
Web
server and SNMP management supported
|
|
Indicator
|
LED
indicator
|
Power status indicator
E1 activity status indicator
Ethernet LAN indicator
Optical connection indicator
|
|
Power
|
Supply
|
dual
power supply
|
|
DC -48V~-72V
|
|
AC
100～240V 60 Hz.
|
|
Consumption
|
≤35W
|
|
Working
Environment
|
Temperature
|
0~
50°C
|
|
Relative
Humidity
|
≤95%
(non-condensing)
|
|
Storage temperature
|
0-70 ° C
|
|
Dimension
|
W
x H x D (mm):
|
1U Rack
mount: 440 x 44 x 135 (mm)
|
Applications
Application story:
FAQ:
Question1: Can the 16E1 TDM over IP device web management support different browsers?
Answer: Yes, the devices can be monitored and configured in most browers, for example, IE, Google Chrome, Firefox, etc.
Question2: Can the 16E1 TDMoIP converter support CESOP protocol?
Answer: The TDM over IP can not support CESOP protocol. Our BD-FE1-IP can support the CESOP protocol.
Question3: Thanks for your soon feedback and professional support. The only problem I see is, I don't need 220V AC. I would prefer 110/120V AC. Plus the option for -48V DC.
Answer: Our 16 E1 over Ethernet Multiplexer power is with a wide range, which can support AC 220V and 110/120V. The 16E1 TDMoIP device also can support double AC and DC 48V.
Question4: Can Baudcom provide 1*RJ45 to 2*BNC male cable 50cm?
Answer: Yes, Baudcom can provide the cable, but need to pay attention to line sequence.
Question5: Can the 16 E1 TDMoIP converter support optical uplink?
Answer: Yes, the E1 tdm over IP converter can support both 10/100M-TX electrical and 10/100M-FX optical uplinks.
Question6: Does the 16E1 ethernet converter support VLAN?
Answer: Yes, the E1 tdm over ethernet converter can support VLAN function. The user can configure the VLAN and Q-in-Q VLAN via web management.
Solution
Ordering information
Related Products
