Site map    Tel:+86-21-37709251    Contact Us Chinese
Integrated Service Access Device
BD-MUX04-V5, which was developed by BAUDCOM, provides various features and applies to different networking, meeting customers' requirements.

  Request price     Contact us

INFORMATION

Description

BD-MUX04-V5, which was developed by BAUDCOM, provides various features and applies to different networking, meeting customers' requirements. BD-MUX04-V5 is the latest generation of PCM Multiplexer of BAUDCOM. With the small size, lower power consumption, high reliability, BD-MUX04-V5 is easy to maintain and manage, which saves space in the equipment room and minimizes the CAPEX and OPEX.

The BD-MUX04-V5 can be widely used in electric power, oil, municipal administration, water resources monitoring, traffic, military etc. It supports transmission of monitoring, remote control, and alarm data signals, and provides dispatching phone and administrative phone services on the transport network. BD-MUX04-V5 is fully applied to linear, ring, mesh network, achieving flexible networking applications. For easier operation and maintenance, unified GUI EMS based on DCN and DCC channel and web-based server are provided, CORBA is supported, local/remote loopback and embedded BER Tester are supported, meanwhile, online / local upgrade for firmware and software.

Specification

BD-MUX04-V5 supports multiple protection mechanisms as follows:

   ●   E1 1+1 protection of both intra-card and inter-card

   ●   E1 Ring Protection of both intra-card and inter-card

   ●   STM-1/4/16 SNCP and 1+1 MSP

   ●   1+1 Dual Controller protection

   ●   Main Control Card 1+1 protection

   ●   Power Card 1+1 protection

   ●   All cards are hot-swappable


BD-MUX04-V5 supports the following services on different ports:

   ●   PCM voice services on FXO, FXS, hotline, magnet, 2/4-wire audio ports and EM

   ●   Low-speed synchronous data services (N x 64 kbit/s V.35, X.21, and C37.94 data), asynchronous data services (RS-232/V.24/V.28, RS-422, and RS-485/V.11), 64 kbit/s G.703 co-directional data/C37.94 teleprotection interface, Dry contact interface, High voltage protection interface etc.

   ●   PDH services through the E1, E3/DS3 ports.

   ●   Ethernet services including switching (VLAN), channel Ethernet services (Transparent).

   ●   Support Layer-3 routing card, RS-232/RS-485 conference, 2-wire/4-wire audio voice conference, analog telephone conference.

Items

Standards and Protocols

C37.94 optical port

IEEE C37.94TM-2002

Audio voice port

G.711, G.713

Asynchronous data port

V.24, V.11

Co-directional data port

G.703

E1 port

G.703, G.704

Clock port

G.823

Ethernet port

IEEE 802

G.7041/G.704 2/G.7043 and G.8040


                                    

Card/Module Name

Card/Module Type

Description

Main Chassis (Including Backplane)

BD-MUX04-V5.JXMB

19", 3U, with 2 power card slots, 2 cross-connection card slots, 12 tributary service slots, including fan and cabling tray.

DC Power Card (75W)

PWR01A

DC -48V power supply,75W, can be 1+1

AC Power Card (75W)

PWR02A

AC 220V power supply,75W, can be 1+1

DC Power Card (150W)

PWR01C

DC -48V power supply,150W, can be 1+1, Used in BD-MUX04-V5.

AC Power Card (150W)

PWR02C

AC 220V power supply,150W, can be 1+1, Used in BD-MUX04-V5.

E1 Transmission&Cross-connection Card

EXM01

2 NM ports (can be 2 NM port or 1 NM port and 1 external clock input/output port), 8E1 ports (can be transmission port or service access port)

STM-4/STM-1 Transmission&Cross-connection Card

OXM04

Aggregation Card. Dual STM-1 or STM-4 Interfaces per Card, SFP Type. Cross-connection matrix and Timing Processing are Embedded.(SFP should be Ordered Separately)

STM-16 Transmission & Cross-connection Card

OXM16

Aggregation Card. Dual STM-16 Interfaces per Card, SFP Type. Cross-connection matrix and Timing Processing are Embedded. (SFP should be Ordered Separately). Used in BD-MUX04-V5 platform

Dual STM-1 Tributary Card (SC Type)

OS01A

Dual STM-1 Interfaces per Card (Default S1.1), SC Type.(L1.1,L1.2, Single fiber Bi-Directional options are Available)

Dual STM-1 Tributary Card (SFP Type)

OS01S

Dual STM-1 Interfaces per Card, SFP Type.(SFP should be Ordered Separately). (S1.1,L1.1,L1.2, Single fiber Bi-Directional options are Available)

12E1 Tributary Card (RJ45)

EP03

12E1 per Card. RJ45 Type,75ohms/120ohms.

BH.850.123 Cable Should be Equipped Separately when using 75ohms

8E1 Uplink & Cross-connection Card (RJ45)

EP08

8E1 per Card. RJ45 Type,75ohms/120ohms. Support E1 1+1 protection

Electrical Fast Ethernet Card (EoS)

FE01

4 Electrical Fast Ethernet Ports per Card, EoS, GFP/LCAS/VCAT

Optical Fast Ethernet Card (EoS)

FE02

4 Optical Fast Ethernet Ports per Card, EoS, GFP/LCAS/VCAT, SFP Type (SFP should be ordered Separately).

Electrical Fast Ethernet Card (EoPDH or EoE)

FE04

4 Electrical Fast Ethernet Ports per Card, EoPDH or EoE (Ethernet over n*E1, One Channel: 1≤n≤16)

Optical Fast Ethernet Card (EoPDH or EoE)

FE05

4 Optical Fast Ethernet Ports per Card, EoPDH or EoE( (Ethernet over n*E1, One Channel: 1≤n≤16), SFP Type (SFP should be ordered Separately).

EoTS Card (Ethernet over N*timeslot)

FE64

4 Electrical Fast Ethernet Ports per Card, Ethernet over N×64K (One Channel, 1≤n≤31)

Layer-3 Switching Card

ETR01

Support 2 GE combo ports, supporting port-based, 802.1Q-based, and QinQ-based VLAN, STP/RSTP, static and dynamic LACP, static routing and Open Shortest Path First (OSPF)

EoS Gigabit Ethernet Aggregation Card (16:1)

GX05C

EoS Aggregation Card with 16:1 aggregation ratio. Two GE optical ports and two FE electrical ports. Supporting VLAN 802.1q, QinQ, Jumbo frame.

V.35 Interface Card

ED01

Two V.35 ports per Card. N×64K (1≤n≤32). DTE/DCE. (BH4.851.103 DCE Cable or BH4.851.104 DTE Cable should be ordered separately).

X.21 Interface Card

ED02

Two X.21 ports per Card. Comply with CCITT X.21. Clock and data signals comply with V.11.

Flexible Voice Card

CHU01

10 Voice Channel Card. Voice channel supportS hotline, magnet, FXS, FXO. DB25 connector, BH4.851.145 cable should be ordered separately.

Flexible Voice Mother Card

CHU02

Up to 10 Voice Channel Card. Each mother card supports five minislots for voice (FXO/FXS/Magnet). BH4.851.145 cable should be ordered separately.

Multifunction Interface Card

CHM01

4 channel FXS, 4 channel 4-wire with EM, 4 channel RS232. With one DB9 and one DB44 connectors. Can only be inserted into slot 8-13. Ring card should be equipped. Cable BH4.851.143 should be equipped  when 4-channel FXS is used, cable BH4.851.144 should be ordered when RS232 or 4-wire with EM channel are used.

FXO Voice Card

CHL01

10 FXO channels.DB25 connector. Cable BH4.851.145 should be ordered separately.

FXS Voice Card

CHR01

10 FXS channels. DB25 connector. Can only be inserted into slot 8-13. Ring card should be equipted. Cable BH4.851.145 should be ordered separately.

Audio Conference Card

VCF01

Supports 10-channel audio conference.

Support three modes, including conference mode, phone conference mode and intercom mode setting through NMS

2-Wire/4-Wire Audio Voice Card

CH4W01

10 channels of 4-wire voice (no E&M). Electical level adjustable.DB44 connector. Cable BH4.851.085B should be ordered separately.

2-Wire/4-Wire E&M Signalling Card

CH4W02

8 channels of 2-wire/4-wire voice with E&M.

20-channel E&M Signalling Card

EM20

Provide 20-channel E lines and 20-channel M lines and realizes the transmission of 20-channel 1E1M or 10-channel 2E2M signaling.

Signalling type support Type V.

10-channel E&M Signalling Card

EM10

Provide 10-channel E lines and 10-channel M lines, realizing the transmissions of 10-channel 1E1M signaling or 5-channel 2E2M signaling.

Signalling type support Type I, II, III, IV and V.

C37.94 Card

C37D

Dual 2M optical ports per card. Comply with C37.94TM-2002 standard.

Asynchronous Data Card

SD01

16-channel RS232/V.24 card with DB62 connector. cable BH4.851.147 should be ordered seperately.

Asynchronous Data Card

SD02

16-channel RS232 and 2 channel RS422/V.24 card with DB62 connector. cable BH4.851.148 should be ordered seperately.

Low-speed RS232/V.24 Interface Card

SD03

6-channel low speed asynchronous data ports (RS232/V.24), or adaptation function for 2-channel synchronous data ports and 4-channel asynchronous data ports. Comply with ITU-T X.50 Division 3 and ITU-T X.54 standards. Maximum synchronous rate is 64Kbps and the maximum asynchronous rate is 48Kbps. Cable BH4.851.174 should be ordered separately.

Asynchronous Data Conference Card

SD04

Provide 8-channel RS-232/V.24 ports, and 2-channel RS-422/V.11 ports.

Support point to point, point to multi-point and multi-point to multi-point

20-channle Data IO (Dry Contact) Interface Card

DIO20

Dry contact interface card, provide input and output ports for 20-channel single-end or 10-channel dual-end I/O signals

Relay Signaling Interface Card

DIO04

Supports DC signal input detections, and 4 solid-state relay I/O signal output for dry contacts. The input trip voltage level can be set from DC 24V to DC 250V through NMS

64K Codirectional Synchronous Data Card

CHD01

8-channel 64kbit/s codirectional G.703 interfaces. 120 ohms.

48V Ring Card

RING48V

48V Ring Card

Orderwire & Aux Card

LA01

Orderwire interface and one external clock input&output interface and one RS232 Asynchronous Interface

  

Application
 

                                    



Ordering information


Related Products

Fiber-1Voice+4E1+4FE+4RS232 Multiplexer

This device provides 1Channel telephone, 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface

1 Channel Video fiber multiplexer

The vedio fiber multiplexer transmit 1channel digital video broadcasting, 1channel high-fidelity audio.