INFORMATION

Overview

 This device provides 1Channel telephone， 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is very flexible.

Product Photo

Features

Ø Based on self -copyright IC

Ø E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology;

Ø Support FXO/FXS, EM2/4 audio, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user's telephone;

Ø 1channel Voice access, supports caller ID feature and reverse polarity billing functions

Ø Support various sites mutual number allocation function

Ø Provide 4 expansion interface, you can extend 1~4*Channel asynchronous data, such as RS232/RS485/RS422/Manchester code;

Ø 1~4*Channel voice, 1~8Channel switch or two/four line audio and so on

Ø Ethernet interface supports10M/100M, half/full duplex auto- adaptable, support VLAN

Ø 4*Channel Ethernet interface is switch interface, support VLAN, can set to 4* channel logical isolation

Ø Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)

Ø Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.

Ø The transmission distance is up to 2-120Km without interruption

Ø AC 220V, DC-48V, DC24V can be optional

    Parameters

u Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance:       5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length:   820nm

Transmitting power:                      -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity:                       -28dBm (Min)

Link budget:                               16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance:       40Km

Transmission distance:                    40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length:                              1310nm

Transmitting power:                      -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity:                       -27dBm (Min)

Link budget:                               18dBm

u E1 Interface

  Interface Standard:        comply with protocol G.703;
 Interface Rate:                  n*64Kbps±50ppm;
 Interface Code:             HDB3;

 E1 Impedance:              75Ω (unbalance), 120Ω (balance);

 Jitter tolerance:            In accord with protocol G.742 and G.823

 Allowed Attenuation:     0~6dBm

u Ethernet interface(10/100M)

Interface rate:                10/100 Mbps, half/full duplex auto-negotiation

Interface Standard:              Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability:  4096

Connector:                   RJ45, support Auto-MDIX

u FXS Phone Interface

 Ring voltage:                     75V

 Ring frequency:                 25HZ

 Two-line Impedance:          600 Ohm (pick up)

 Return loss:                      40 dB

u FXO Switch Interface

Ring detect voltage:            35V

Ring detection frequency:     17HZ-60HZ   

Two-line Impedance:            600 Ohm (pick up)

Return loss:                       40 dB

u EM 2/4 Line

AD:                                 0dB

DA:                                    -3.5dB

Two/Four-line Impedance:     600 Ohm

Return loss:                       20 dB

u  Working environment

Working temperature:         -10°C ~ 50°C

Working Humidity:                  5%~95 % (no condensation)

Storage temperature:           -40°C ~ 80°C

Storage Humidity:               5%~95 % (no condensation)

Specifications

  Application

Ordering information

Related Products

4E1 Fiber Multiplexer 4E1 fiber multiplexer can multiplex 4E1 signals fiber,Distance up to 120Km,Supporting 1+1 fiber protection,dual fiber or WDM

8E1 PDH Optical Multiplexer 8E1 fiber multiplexer can multiplex 8E1 signals fiber,Distance up to 120Km,