INFORMATION
Functions
As a cost
effective solution for the traditional telecom services migrate to the IP packet
networking technology, BD-FE1-IP adopts the innovative TDM over IP (TDMoIP) technology,
it transports the legacy E1 data through the existing Ethernet or IP network.
BD-FE1-IP is the new
generation of the TDM over IP equipment with IP circuit emulation that supports
transportation of four E1 over Ethernet or IP network. The uplink ports and
user data ports are IEEE 802.3 compliant, 10/100M BaseT auto-sensed Ethernet port.
The
state-of-the-art design provides the highest availability with the accurate
timing signal and data bit stream reconstruction. Predefined system parameter
profiles that according to different application requirement; ultimately
simplify the installation process and saving the maintenance cost.
The
E1 tdm over IP converter have the performance of high transmission efficiency, low transmission
delay, high precision clock recovery. The TDMoIP converter support 1E1 interface and IP internet
transmission of 4 100M Ethernet
interface . It is also
suitable for connecting to the wireless equipment to achieve fast deployment of
E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges,
replacing much more costly microwave radios.
Features
Ø One E1 interface, E1 interface impedance support 75Ω and 120Ω
Ø Support
L2TPv3/IPv4, UDP/IPv4, Metro Ethernet (MEF-8) and MPLS (MFA-8) and other
agreements
Ø E1
interface complies with G.703, G.704 standard
Ø Each E1
support jitter buffer depth of 1-255msec
Ø Configure
via CLI/Web
Ø Support
VLAN tagging and QinQ function
Ø Support
Qos setting
Ø Provide statistics for Ethernet+E1
Ø Support
software and firmware upgrade
Technical Specifications
|
Item
|
Description
|
|
Model
|
BD-FE1-IP
|
1 E1, 3FE electrical ports and 1 FE optical port
|
|
Interfaces
|
Uplink
|
3 FE electrical ports and 1 FE optical port
Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x
Speed and duplex auto-negotiation or manual
|
|
E1 Port
|
1 E1 Supported
Comply with G.703
G.704
Impedance: E1-120Ω or 75Ω
|
|
Power
|
Supply
|
-48V DC or 220V (110V) AC power supply
|
|
Consumption
|
≤10W
|
|
Working Environment
|
Temperature
|
0~ 50°C
|
|
Relative Humidity
|
≤90%
(non-condensing)
|
https://www.youtube.com/watch?v=iWRIhpey3Mg
Typical Application
E1 over ethernet
Application1
E1 over ethernet
Application2
BAUDCOM E1 TDM over IP tested successfully by E1 Tester
Can E1 over Fiber optical Ethernet ?
Ordering information
Related Products
